Home / Videos / Wafer Inspection and Metrology Startup (Proforma 300iSA)

Wafer Inspection and Metrology Startup (Proforma 300iSA)

Watch MTI’s Proforma 300iSA Startup Video and see how to start this cost-effective wafer measurement system for use.

Video Summary

This video shows how to start the Proforma 300iSA for use.  The first step is to power-on the unit using the switch in the back of the machine.  Allow time for the unit to initialize.  After powering on, the chuck will initialize by moving back and forth until it is in the proper position. A Status light next to the control knob will turn from white to green when the Proforma 300iSA is properly initialized.

Additional Resources

Proforma 300iSA Brochure

High Resolution Semiconductor Wafer Measurements at Lower Costs

Measure Wafer Bow, Warp and TTV with Capacitance

Related Videos

Capacitance Sensor Guarding Principles

Capacitance Sensor Guarding Principles

In this video Konstantin discusses the guarding principles used in capacitive sensors, and explains how MTI uses this principle to make very accurate measurements.